We want to keep our advertising
pages as current as we can and we have removed the following ads from our
old classified ad system to this archive page for Rumely & Huber.
We will keep these ads here indefinitely for your use in contacting someone
who may be able to help you with your needs in the future. If you
have an archived ad on this page that you would like to have removed, E-Mail
us and we will get it removed. The new system will alow you to keep
your ads active by allowing you to cancel or renew them yourself.
For Sale: (6/10/98)
Advanced Rumely - 1630 oil
pull tractor. S/N 8892 - running. At Auction Sale in Saskatchewan
on the 16th of June, 1998 - 9 miles west of Kindersley, Saskatchewan and
2 miles north. Pat Gaddes, Suite 800, 707 8th Ave SW, Calgary, Alberta,
Canada T2P 3V3. Phone (403) 781-3287 or E-Mail me at: firstname.lastname@example.org
Information: I have
a 1919 Rumely Oil Pull tractor. It runs and is in above average shape.
It is not perfect and does need some restoring. What I would like
to know is how much this tractor is worth. Please e-mail me at Nordbone@hotmail.com.
Thanks. Mike Nordman.
I am looking for information
on a Maddison Kipp Lubricator. I can't seem to get mine to pump oil.
It is for a 20 - 40 Oil Pull Rumley. email@example.com (Cam Eccleston)
Huber Model "LC" restored
or unrestored condition. firstname.lastname@example.org
For Sale: (5/8/98)
1929 Huber 20-36.
$4000. Phone (519)542-5042.
For Sale: (5/6/98)
HUBER 18-36, 1926 yr,
s/n 9016, straight original & running. Complete. Wendell
Kelch, 3727 Starling Rd, Betherl OH 45106. Call (937) 828-1149
or E-Mail to: email@example.com
Wheels for 6 HP Advance
traction engine. Would like to locate a 6 hp Advance that would be
for sale. Byron Leathermon, 1824 S 1066 W, Lexington IN 47138.
Phone (812) 866-4515 or E-Mail me at: firstname.lastname@example.org
Advance Steam Engine--10
hp. Or other small steam traction engine. Any restorable condition. Possible
trade for gas engines, tractors, or guns. Larry Barson, 4900 Clinton Rd,
Jackson MI 49201. Phone (517) 789-6926, Fax (517) 750-4441, or E-Mail
me at: email@example.com
I have a Huber "L" (1936),
I am looking any or all the facts, history and any data that I can find
on this tractor, any help would be appricated! Thank-you Jim Kolstad.
E-mail to: firstname.lastname@example.orgWanted: (3/27/98)
Looking for a 30-60 E
running or rebuilder. Barnesville MN. Phone (218) 937-5627
or E-Mail me at: email@example.com
Rumely 30-60 Model
E, restored or unrestored. Ed Dina, 330 Plattekill Rd, Marlboro NY
12542. Phone (914) 236-3751 or E-Mail to: firstname.lastname@example.org
Rumely Oil Pull, any model.
Ken Birman, 4380 E Kirby Rd, Battle Creek MI 49017. Please call (616)
962-8075 or E-mail to: email@example.com - Michigan
The air cleaner and drivers
seat & bracket that holds it in place for a 1921 model 12-20 K Heavy
Rumely Oil Pull. Thank you. Brien McCracken, 832 Kline Rd, Bellingham WA
98226. Phone (360) 398-7841 or E-Mail me at: firstname.lastname@example.org
Wanted To Buy: (2/15/98)
Huber tractor with grader
blade under the middle. Paul Rauch, 1941 Riggs Rd NE, Newark OH 43055.
Phone (740) 366-5477 or E-Mail to: email@example.com - Home Page: http://www.suresite.com/oh/j/johndeere
Oilpull 20-30 or 15-25.
Will buy or trade. If you have a tractor call me at (507) 645-7396.
Dead or Alive. Rumley oil
pull, steam, 60 HP & up - Or other models (steam): Hart Parr, Case,
Farguhar or Peerless. Any information or leads anyone can provide on any
of the models listed here will be greatly appreciated. Thank you. Steve
Trombly, North River Road, Milford NH 03055. Phone (603) 672-0215 or E-Mail
Rumely 30-60 Model E. Ed
Dina, 330 Plattekill Rd, Marlboro NY 12542. Phone (914) 236-3751 or E-Mail
me at: firstname.lastname@example.org
A specifications manual
or any other form of specific information for a Rumely Oil Pull 30-60 Model
E. - Kyle Ness, 405 25th Ave NW, Minot ND 58703. Phone (701) 838-5150 oe
E-Mail to: email@example.com
Clutch for HK Huber, also
belt pulley drive gear and shaft. Howard Taylor, 6771 S Military Road,
Grayling MI 49738. Phone (517) 348-5187, Fax (517) 348-6324, or E-Mail
me at: firstname.lastname@example.org
Rumely oil pull or do-all,
Almost any condition, or size. Located with-in 500 miles of Eau Claire,
WI. Have a nice day! Ralph Bosben, PO Box 107, 403 Main St, Downing WI
54730. Phone (715) 265-4078 or E-mail me at: email@example.com
Huber road grader. Will
trade old tractors or purchase. Paul Rauch, 1941 Riggs Road NE, Newark
OH 43055. Phone (614) 366-5477 or E-mail to: firstname.lastname@example.org
I looking for a drag-link
assbly for 1946 Huber Road Maintainer. 27 3/4 inches long. Jerry Fisher,
HC 2 Box 94, Payson AZ 85541. Phone (520) 478-4384 or E-mail me at: email@example.com
To trade a restored 16-30
Model H Rumely Oil Pull for any make of Steam Traction Engine, does not
have to be restored BUT must have a good Butt Strap Boiler. Ed Dina, 330
Plattekill Road, Marlboro NY 12542. Phone (914) 236-3751 or E-mail me at:
I am looking for a starter
bar for a 15-25 Rumely. If you have one you would like to sell, I'm at
Oil site gauge for Rumely
16-30 and others in the family. Needed for running extension collection
machines at the Saskatchewan Western Museum. (If none are found for sale
we will machine a batch!!) Call Mark MacKenzie at (306) 934-1400
Etc. on Rumely Oil Pull. Ed Dina, 330 Plattekill Road, Marlboro NY 12542.
Phone (914) 236-3751 or E-mail me at: firstname.lastname@example.org
Big timing gear for 1926
Model L Rumely. Fred Heidrick, 18189 Co Rd 97, Woodland CA 95695. Phone
(916) 662-5854 or E-mail me at: email@example.com
Original gas tank and priming
pump for heavy weight Oil Pull. Fred Asseier, 7115 Orozco Drive, Riverside
CA 92506. Phone (909) 780-3984 or E-mail me at: firstname.lastname@example.org
Good useable radiator for
a 20-40 Rumely oil pull. Also need other misc. parts like rocker arms,
pushrods, air cleaner, etc. Any help greatly appreciated. Contact Richard
Weiland at: email@example.com
Huber HK engine and tractor
parts, please call Alan Skinner at (216) 564-9830.
Model E 30-60 Rumely. Ed
Dina, 330 Plattekill Road, Marlboro NY 12542. Phone (914) 236-3751 or E-mail
me at: firstname.lastname@example.org
For a Rumely Model F 15-31,
an ignition push rod bracket. This bracket mounts in the crank case on
the top and has two holes, one of which is for the ignitor push rod and
the other hole is for the intake valve push rod. This bracket is the same
on the right hand side of the Model E 30-60 and the Model B 25-45. This
part is shown in the Rumely Oil Pull parts book, page 72, item #3213. Also
need 3 differential pinion gears for Model 15-30 Rumely Oil Pull. Ed Dina,
330 Plattekill Road, Marlboro NY 12542. Call (914) 236-3751 or E-mail to:
For Sale: (12/27/96)
1927 Rumely Oil Pull. Model
#1632, all original parts. Excellent running condition and paint. Has been
stored inside for the last 25 years. Complete history of the tractor's
owners available. For more info on purchase and delivery, call me! Jerry
Sabine, 1826 2nd Ave N.E., Medicine Hat, Alberta, Canada T1C 1C4. Phone
Looking for an Oliver 44
Tractor built in Battle Creek, MI. E-mail me at: erice@ccm,tdsnet.com
Looking for Oliver 60 Std. "stuff".
Driveshaft, seat, grill, gearshifter, manifold, etc...what do you have?
Classified Ads Page
The Rumely/Huber Tractor Stuff Page